CIE Nov 2016 v5 Paper 3 Q1

Answers available below

In Questions 1 and 2 you will determine the percentage purity of industrial grade calcium carbonate, CaCO3, by two different methods. PMT In the first method you will collect and measure the volume of gas given off in the reaction between a known mass of industrial grade calcium carbonate, in the form of small marble chips, and a known amount of dilute hydrochloric acid. The acid will be in excess. The impurities in the calcium carbonate will not react with the acid. CaCO3(s) + 2HCl (aq)CaCl 2(aq) + H2O(l) + CO2(g) FA 1 is industrial grade calcium carbonate, CaCO3, in the form of small marble chips. FA 2 is 2.00 mol dm3 hydrochloric acid, HCl. (a) Method Read through the whole method before starting any practical work. The diagram below may help you in setting up your apparatus. clamp clamp water tubFill the tub with water to a depth of about 5 cm. Fill the 250 cm3 measuring cylinder completely with water. Hold a piece of paper towel firmly over the top, invert the measuring cylinder and place it in the water in the tub. Remove the paper towel and clamp the inverted measuring cylinder so the open end is in the water just above the base of the tub. Pipette 25.0 cm3 of FA 2 into the reaction flask labelled X. Check that the bung fits tightly in the neck of flask X, clamp flask X and place the end of the delivery tube into the inverted 250 cm3 measuring cylinder. Weigh the container with FA 1 and record the mass in the space on page 3. Remove the bung from the neck of the flask. Tip FA 1 into the acid and replace the bung immediately. Remove the flask from the clamp and swirl it to mix the contents. Swirl the flask occasionally until no more gas is evolved. Replace the flask in the clamp. Reweigh the container and any residue of FA 1 and record the mass in the space on page 3. Calculate and record in the space on page 3 the mass of FA 1 used. When no more gas is given off, measure and record the final volume of gas in the measuring cylinder in the space on page 3. Keep the contents of flask X for use in Question 2.UCLES 2016 9701/35/O/N/16<br /> Results PMT [2] (b) Calculations Show your working and appropriate significant figures in the final answer to each step of your calculations. (i) Calculate the number of moles of carbon dioxide gas collected in the measuring cylinder. (Assume that 1 mole of gas occupies 24.0 dm3 under these conditions.) (ii) Use your answer to (i) and the Periodic Table on page 12 to calculate the mass of pure calcium carbonate in the sample of industrial grade calcium carbonate, FA 1. moles of CO2 =mol (iii) Use your answer to (ii) and the mass of marble chips used in (a) to calculate a value for the percentage purity of the sample of industrial grade calcium carbonate, FA 1. mass of CaCO3 =g percentage purity of FA 1 =% [4] (c) Not all the carbon dioxide given off in the reaction is collected in the measuring cylinder. Suggest a change to the method which would lead to an increase in the volume of carbon dioxide collected.[1]UCLES 2016 9701/35/O/N/16 [Total: 7] [Turn over<br />

Show answer